Way 1: Use HP boot menu key to boot from USB. Step 1. Turn on or restart your laptop and press the HP boot menu key - ESC or F9 immediately to access its boot menu. Step 2. Wait until the HP boot menu to show up and you will see 4 options in the following. Press F9 to access BIOS boot options. Step 3. Use the right arrow key to select System Configuration, use the down arrow key to select Boot Options, and then press Enter. Check for Legacy Support in the list. If Legacy Support is not listed, continue to the next step. If Legacy Support is listed and you are enabling Secure Boot, use the down arrow to select Legacy Support, press Enter 1. Click "Start" button, type "device manager" in the Search Box and hit Enter. 2. Select "Device Manager", expand categories to find the name of your hard drive. Right-click the device and select "Update Drive Software…," then select Search automatically for updated driver software. 3. Press the power button to turn on the computer, and then immediately press the Esc key repeatedly until the Startup Menu opens. Press F10 to open BIOS Setup. Use the right arrow key to select System Configuration, use the down arrow key to select Boot Options, and then press Enter. Check for Legacy Support in the list. Hi, I am trying to PXE boot a couple of new HP Probook 430 G4, in order to do this I need to Enable Legacy Support and Disable Secure boot. (BIOS > Advanced > Secure Boot Configuration). I apply the setting and go back to main, choose save and exit. Once going back to the BIOS I can see that none of the changes are saved. View Statistics: Hi @mememe93 , Look under the Advanced tab in BIOS to enable Legacy USB support. Here’s an image taken from the motherboard user manual (Sect 3.18) which shows the options. (click on image to enlarge for better viewing) - Motherboard and CPU. In you bios menu, when you pick the boot priority, you have the option to chose between USB, HDD and FDD drives. However, additionally, you can select the HDD to boot from in a separate menu on the boot menu page. Go into that menu, and check if your USB stick is listed next to the HDD drives in your system. Save this answer. 1 8 0. Level 1. 09-09-2016 07:54 AM. You will need to change the secure boot config to "Enable Legacy boot, disable secure boot" in the Advanced tab. SAVE then exit BIOS. the TRICKY ! next step when BIOS opens is a series of beeps with a 4 digit code to verify disable Secure boot option change. Dịch Vụ Hỗ Trợ Vay Tiền Nhanh 1s.

hp laptop legacy boot option not showing